Fully automatic machine for the production of PRE STRETCH film, pre-stretched film. As the only company in Poland, we have developed a technology for the production of pre-stretch film for very thin cardboard cores. This has very high economic benefits, due to the possibility of using thin and light cores for the production of films.
The rewinder is equipped with a four-stage film stretching system, designed by our company ENGINEERING CC.
The RPS 500 rewinder can also produce conventional stretch foil, without using the pre-stretch function, it can be used as a traditional stretch foil rewinder, function (2in1).
The machine can produce foil in manual and machine reels.
The RPS 500 is equipped with a double edges system and an oscillating roll winding system.
Pre Stretch film is a stretch film with a low thickness ranging from 5 to 12 microns.
The film has better performance parameters than standard stretch films.
Switching from standard film to pre-stretch film has many advantages:
● EFFICIENCY - the pre-stretch film in the same volume as the standard film has a length 3 times longer.
● EASE OF USE - does not require strong tension when wrapping pallets.
● ECOLOGY - The foil is environmentally friendly, it generates about 50% less waste during packaging.
The system of pre-stretching of the film in the range of 0-400%, regulated by PLC
Permanent monitoring of the tension of the film web wound via PLC
Input foil thickness range: 8 - 30 microns
Maximum Jumbo Roll Diameter: 460 mm
Jumbo Roll Bushing Diameter: 76 mm
Jumbo foil web width: 300 - 550 mm
Jumbo Roll Centering: Manual
Jumbo roll loading: system trolley
Max Jumbo Roll Weight: 70 kg
Maximum diameter of the wound reel: 250 mm
Winding Roll Inner Diameter: 38, 50, 76 mm
Required air pressure in the system: 7 - 8 bar
Air consumption: 180 l / min
Power supply: 3 phase, 400V, 50Hz
Electricity consumption: 12 kW
Maximum linear speed of the machine: 1100 m / min
Settings are made via the touch panel
Possibility to rewind CAST and BLOW films
Scrolling performance depends on:
● Thickness of the input foil,
● Degree of stretch,
● Jquality of the input foil.
POSSIBILITY OF MACHINE CUSTOMIZATION ON REQUEST BY INDIVIDUAL CONFIGURATION